Why won t my Chainsaw Start – (Electic, cordless, Stihl, Ryobi, Poulan chainsaws) 15 Reasons

Why Your Chainsaw Won't Start

How To Fix A Chainsaw That Won’t Start? In my experience, Why won t my Chainsaw Start – 15 Possible Reasons and how to solve them.

New day! You are about to give a fresh start. But! When you pull the start button, the chainsaw is not starting. What happened? 

Heavy workloads and deadlines are burning your ass and you ended up with stress. To cope up with the mental situation, you have started to post forums. Questions like “my chainsaw won’t start” and “how to fix chainsaw problem”.

People are replying with possible solutions. But you are running out of time by scrolling, google. How long can you do that? Can you let your client go for this silly reason? 

No! Just read this article. It will tell you the 15 possible reasons why your chainsaw won’t start with a 100% solution.  

Not only that but also the complete guide will show some exotic maintenance tips. Sit tight and start reading.  

10 Possible Reasons Why Chainsaw Won’t Start: Solved

Most professionals use three types of chainsaws. Gasoline is one of them. It has the major problems they face. Here are the 10 possible reasons why chainsaws are not starting.

Chainsaw Won't Start

1 Fuel Check

The first reason is either empty (no fuel) or the fuel is outdated. This is why chainsaws do not start. 

Solution:

  • Clean the fuel filter first.
  • Refuel the engine with fresh gasoline. 
  • Give it a start.

Fuel tips:

Use 89 graded unleaded gas. This will keep the engine power. Less the grade may damage the engine, or your chainsaw may face piston seizure. 

2 Maybe The Carburetor Is Clogged

Fresh fuel. Still, it is not starting? Time to check the carburetor. Maybe the outdated fuel clogged the carburetor. 

How? Expired fuel gets sticky. As a result, it stuck with carburetors’ air intake area and needle valves. Check out the following solution.

 Solution:

  • Brown or golden carburetor means it needs serious attention.
  • Detach the carburetor first.
  • Use a fresh brush to clean it up. 
  • Wipe the air intake and needle valve.
  • Specialized cleaning sprays are best to clean this area.
  • If there is no option, non-abrasive soap may work.
  • Dry each component and reattach it.
  • Try once again to start the engine.

3: Spark Plug Problems

Is your chainsaw starting now? No! Let’s check the spark plug. Sometimes, this plug shows the following problems: dirty, damaged, or somehow you could not attach it properly. 

These are the common problems. You can solve it. Follow the instructions.

Solution:

  • Clean the spark plug first.
  • Then start the engine.
  • If it does not start, check the porcelain insulator. 
  • Cracked insulators can stop starting. So, it is better to replace the spark plug.
  • You can check it in the repair shop before changing.
  •  Usually, spark plugs are low-cost. Replacement is a wise choice.

4. Your Engine Might Be Flooded

Spark plug issues are solved. But the engine is not starting. Maybe your engine is flooded, the primer valve issues. 

What is that? The primer valve injects fuel into the engine when you press the start button each time. This valve works two ways: one is, moving the fuel to the engine. 

The second is, to keep the excess fuel in a tank. And this time, most of the problems start. Your engine gets flooded; as a result, the chainsaw stops working.

Solution:

  • Drain all the excess fuel.
  • Then push the starter while pressing the throttle about 8 times.
  • Reattach the spark plug.
  • Start once again.

5. Air Filter Problem

The problem has to be solved yet, right. Time to check the air filter. The air filter is kind of a nose for the engine. It creates room to breathe and keeps the engine cool.

If the air filter is clogged, the engine will not start. Clogged air filters may cause carburetor damage or even engine damage. So here are the solutions.

Solution:

  • Remove the air filter
  • Brush it to remove the dirt and grime.
  • Then soak it up in lukewarm soapy water for 2 hours and let it dry.
  • Attach it and start the engine.
  • If it does not start, replace the air filter.

6. Weather Can Be A Big Issue

Low temperature can be the sixth issue. This is unusual for the electric chainsaw. But for gasoline, it’s a major issue. The fuel iced up, and it needs a little more choke to start. So, your living area’s temperature can be a big issue.

7. Ignition Coil Problem

Remember, the topic spark plug problem? This problem can be formed by the ignition coil. The ignition coil sends the voltage to the spark plug. Failing to perform this procedure leads to not starting the engine. 

Solution:

  • Test your ignition coil with a multimeter tester.
  • If it works, reattach it.
  • Not working! Replace the ignition coil.

8. Recoil Starter Problem

You have done all the possible try. The problem persists. Maybe the recoil spring is the reason. Faulty springs can stop the engine from starting.

Solution:

  • You have to restructure the total starter assembly.
  • Open the starter assembly.
  • Then remove each component.
  • Take out the recoil starter spring.
  • Replace a new one. Start the engine. Done!

Tips:

Changing the recoil spring may be tough for a beginner. It is wise to go to the repair shop.

9. Spark Arrestor Problem

A clogged spark arrestor screen can be another problem; it sometimes damages the engine. You will notice that by checking the chainsaw performance. So, where does it situates? Behind the chainsaw. It is inside a hole.

Solution:

  • Use a screwdriver to untie the arrestor.
  • Take a plier to bring it up from the hole.
  • Burn the arrester with a propane torch. 
  • It will turn the carbon build-up into ashes.
  • Brush up the ashes and reinstall the arrester.

10. Clutch Pad Problem

The clutch pad keeps the chainsaw speed smooth. It’s like a car; you can either slow or speed up. But what if you turn your speed fast, but the chain is running slow? Maybe your clutch pad has the problem.

Solution:

  • It is wise to go to the repair shop. Your chainsaw needs a new clutch to fix the issue. 

4 Reasons Why Electric Chainsaw won’t Start: Solved

Gasoline and Electric chainsaws have the same characteristics. Electric chainsaws have a few differences. So far, four major reasons are found that won’t let your chainsaw start.

Electric Chainsaw Won't Start

1. Check The Extension Cord

Newbies get panicked for the first time. Their reactions are like, “oh my god, I am burned” Don’t be. Maybe your extension cord is not working. It is either outdated or broken in some areas.

Solution:

  • First, check your electric connection.
  • If it’s ok, check the wire.
  • Maybe there is some leakage. Fix it with a simple wiring experience.
  • It is better to change the total extension cord. This is affordable.

2. Throttle Lockout Check

Sometimes we forget to check the shallow reasons. Throttle control is one of them. Maybe you did not press that correctly. That is why your chainsaw is not starting.

Solution:

First press. Then hold it for 30 seconds. Done!

3. GFCI Problem

Faulty GFCI can be a reason. Many professionals claim it in several forums. So here is the simple solution.

Solution:

  •  There is a red button in the middle of GFCI.
  • Press it to reset the area.

4. House Circuit Breaker Problems

GFCI shows a major indication of house circuit breaker problems.

Solution:

  • It is wise to call a professional to solve the problem.

Why Cordless Chainsaw won’t Start

Cordless chainsaws have the same problems you read earlier. One exception everyone noticed is the battery.

Battery Problem:

Here are some of the cordless chainsaw battery problems.

  • The battery cell does not match.
  • Keeping the battery inside the machine after work.
  • The battery has swelled.

Solution:

  • Check the battery cell before buying.
  • Never keep the battery inside after work. 
  • Recharge the battery and check if it is working or not.
  • It is good to change the swelled battery.

Why would my Husqvarna chainsaw not start?

If it is a saw with a lot of time and uses I would start troubleshooting by checking the fuel feed tube and the tank pressure pump and line. They deteriorate over time and cause poor fuel feed.

You can have all the spark and fuel in the world, won’t help if passages in the carburetor are plugged. bad fuel, flooded, blocked muffler, no compression All are reasons for it not starting.

why won’t my stihl chainsaw start

If you have Stihl chainsaw and it won’t start, it might be because the chain is not in the correct position. You should replace the chain if it’s frayed or missing teeth.

There are a few reasons why your stihl chainsaw might not start. One reason is that the chain may be tired or damaged from being used in the past. Another issue could be that the battery is weak, and you need to replace it. If any of these problems persist, then it may be best to call a service technician to help you fix the chainsaw.

why won’t my Poulan chainsaw start

If you’re lucky, your Poulan chain saw will start on the first try. But for many people, this is not the case. One common reason why a chain saw won’t start is that the chain has been stored in an uncleaned or wet spot.

When it’s dry and aired out, the chain should start easily. If you own a Poulan chainsaw, you know that it can be difficult to start it. The chainsaws often seem to need a lot of effort to get started, and many owners have found that they can’t get the job done quickly enough.

1. If the battery is dead, the Poulan chainsaw might not start because it needs a new battery.

2. If the chain is kinked, it might need to be replaced or tightened up.
3. If the sharpener isn’t getting enough juice, it might need to be replaced.

why won’t my Ryobi chainsaw start

RYobi chainsaw users are usually disappointed when their tools don’t start up. The problem is that there are a few reasons why this could happen. One reason is that the chain may be too tight or it could be kinked out. Another reason could be that the battery is weak or gone. If you’re not sure how to fix your chainsaw, take it to a professional.

1. Make sure the chain saw is fully charged with fuel and lubricant. This will help prevent it from jamming or turning prematurely on you.

2. Don’t over-reach with the chainsaw; keep it close to the ground so that you don’t lose any of your grip or move it unnecessarily around.

3. Be aware of your surroundings; make sure there’s no noticeable obstruction in front of the chainsaw, otherwise, you’ll have difficulty cutting through something thicker than paper (like wood).

10 Essential Chainsaw Safety Tips

Chainsaw Safety Tips

Have you got your promised solution? Not yet. It’s almost 70%. Your rest of the 30% lies under the coming sections. 

Safety will cover 15%. Now you may ask why is it essential to add this topic here? No matter what your chainsaw is, it is dangerous. 

Lack of proper safety may lead to severe health risks. All of the mentioned solutions have potential risks. To save your form there, here are some of the effective safety tips.

1. Read the manual

Many professionals avoid this. It sounds simple; every chainsaw comes with basic features; what is the deal to read the manual? Don’t do this! 

Manufacturers design their products differently. So, the chance of danger is high. Read the manual to avoid an accident.

2. Wear safety essentials: 6 Products 

Wearing the following safety measures will save you from potential accidents. Check the following products:

  • Goggles
  • Noise-cancelling hear protections.
  • Gloves
  • Chaps 
  • Helmet. 

3. Start with bite-size work

Most of the beginner starts with bucking or limbing? Don’t. it’s better to cut firewood and logs as the starter. Just remember the theory; when you go to the restaurant, they give you a starter before the main meal. Right? 

4. Work together

Keep a colleague with you. Remember, it’s all about balance. Without proper help, your work will be time-consuming and risky. Save your time and your health by keeping a colleague.

5. Engage the chain brake

Before starting your chainsaw, engage the chain brake. Every year many people have serious injuries for this simple avoidance. 

6. Use a scabbard

Cordless chainsaws need this. While you are on the move, use a sheath to cover the chainsaw. It will save you from an accident and the chain from damage. 

7. Never cut with chain-nose

Kickback injuries can be severe. People face permanent body injuries. To avoid this, don’t cut with the nose. Start slowly. 

8. Keep the first aid box near

When you are about to work in a remote area, take the first aid kit with you. Who knows if you or your employee needs it or not?

9. Stay calm

Last but not least. Try to have a 10 minutes meditation session before working. It will help you to stay calm. This is essential; don’t put yourself under pressure. Most accidents happen when the victims are in a rush.

10. Keep the chainsaw away from the children

Do you know? Every year, 40,000 injuries occur from chainsaws. Not only adults but also children are into this. So, keep the tool away from the children. 

Maintenance Tips For Chainsaw: Bonus

Do you know why the chainsaw won’t start? What are the major safety measures? You are close enough to the end. Here is a bonus section. The entire area will focus on some simple maintenance tips. Let’s dig deep.

1. Clean The Chainsaw

Clean the chainsaw 4 to 5 times a week. Here is a tip for cleaning the chain.

  • Chain cleaning: soak the chain in a special mix ( ammonia and water) for half an hour. Then, clean it with a soft brush and wipe it to dry.
2. Sharp the blade regularly

Keep your blade sharp. Now, how do you know if it gets blunt? Your chainsaw will produce more sawdust than saw chips. If you face this, don’t be late. Start to sharpen the blade.

3. Keep the chainsaw lubricated

Try to keep the chainsaw oiled all the time. Lack of this lubrication can lead your machine to permanent damage from the guide bar. It can even overheat the engine. 

4. Use fresh fuel

Outdated fuel can cause serious damage. It can slow down the machine; as a result, your work efficiency will reduce gradually. Clutch pad, spark plug, ignition coil, and other areas can get hurt by outdated oil. 

Final Words

People say, “promises are made to be broken” This article at least did not follow the rule. You read the 15 possible reasons why the chainsaw won’t start. That’s not the end. You have read the safety measure, and there was a bonus part, right? Simple maintenance tips. All of the efforts were to enhance your chainsaw life. So, share this article with your colleagues and save their time by keeping them productive. 

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top