To start a STIHL hedge trimmer, first make sure that the blade is in the correct position. Next, check that the guard is properly attached. Then, hold the handle with your right hand and place your left hand on the rear handle.
Pull the starter cord with your right hand while pushing down on the rear handle with your left hand.
- Read the operator’s manual before starting the hedge trimmer
- Make sure the area around you is clear of obstacles
- Inspect the hedge trimmer blades to ensure they are not damaged and are sharp
- Fill the fuel tank with a quality two-stroke engine oil mixed with unleaded gasoline
- Prime the carburetor by depressing the primer bulb three to five times until fuel begins to squirt from the carburetor overflow tube
- Place the choke lever in the “run” position and pull out on cord until it resists, then pull sharply to start the engine
How to Start a Stihl Hs 45 Hedge Trimmer
If you’re looking for a powerful and easy-to-use hedge trimmer, the STIHL HS 45 is a great option. Here’s how to get started with this handy tool: 1. Make sure the area you’ll be using the trimmer in is clear of obstacles.
This will help you avoid damaging the blades or getting injured. 2. Inspect the trimmer before use. Check that all parts are securely fastened and there are no cracked or broken pieces.
3. Fill the fuel tank with a high-quality two-stroke engine oil mix (we recommend STIHL HP Ultra). If your trimmer has an oil pump, make sure it’s turned on (the knob should be in the “on” position). 4. To start the engine, first push the primer bulb 8-10 times until it feels firm, then pull out the starter cord slowly until you feel resistance.
Now give it a sharp pull to start the engine. Once it’s running, let it warm up for a minute or two before beginning to trim your hedges. 5. Hold the trimmer firmly with both hands when in use.
The right hand should be on the rear handle while your left hand controls the front handle and trigger switch. Keep your fingers away from the cutting blades at all times!
Stihl Hedge Trimmer Choke Position
When it comes to gas-powered hedge trimmers, there is a lot of debate on the proper choke position. Some say that leaving the choke on for a few minutes before starting will help the engine run more smoothly. Others argue that this is unnecessary and can actually lead to engine damage.
So, what’s the correct answer? The answer may surprise you, but there is actually no right or wrong answer when it comes to the choke position on a Stihl hedge trimmer. It all depends on the individual model of trimmer and how it is designed.
Some models may require the choke to be left on for a few minutes before starting, while others may not need it at all. The best way to determine what your particular model needs is to consult your owner’s manual. So, there you have it – there is no definitive answer when it comes to the choke position on a Stihl hedge trimmer.
Each model is different, so be sure to consult your owner’s manual for specific instructions on how to start your particular machine.
Stihl Hs45 Fuel Mix
If you’re a fan of power tools, then you’ve probably heard of Stihl. They’re a German company that’s been around since the early 1900s, and they make some of the best power tools on the market. The Stihl HS45 is a fuel-powered hedge trimmer that’s designed for home use.
It’s a great tool for trimming hedges and bushes, and it’s also lightweight and easy to operate. The Stihl HS45 uses a two-stroke engine, which means that it requires a mixture of gas and oil in order to run. The recommended mix ratio is 50:1, which means that for every 1 gallon of gas, you’ll need 2.6 ounces of oil.
You can use any type of oil that’s designed for two-stroke engines, but we recommend using Stihl brand oil because it’s specifically designed for their products. To mix the fuel, simply pour the gas and oil into a clean container (we like to use an old coffee can) and stir until it’s thoroughly mixed. Then pour it into your trimmer and you’re ready to go!
How Do You Turn on a Stihl Hedge Trimmer?
Assuming you have a standard Stihl hedge trimmer, the process for turning it on is as follows:
1. Make sure the trimmer is properly assembled and that all safety features are engaged. This includes ensuring that the guard is in place and that the cutting blade is not obstructed.
2. Fuel your hedge trimmer with a mixture of gasoline and two-stroke oil. Be sure to follow the fuel mixture ratio specified in your owner’s manual.
3. Prime the carburetor by depressing the primer bulb three to five times.
4. Pull the starter cord until you feel resistance, then give it a sharp pull to start the engine. If the engine doesn’t start after a few pulls, check to make sure there’s enough fuel mix in the tank and that all connections are secure before trying again.
What is Choke on Position on Stihl Hedge Trimmer?
Assuming you are referring to a Stihl HS45 hedge trimmer, the choke is used to help start the engine. To put the choke in the “on” position, push the lever all the way down. This will enrich the fuel mixture and make it easier to start the engine.
How Do You Start a Stihl Hs 56 Hedge Trimmer?
If you’re looking to start a Stihl HS 56 hedge trimmer, the first thing you’ll need to do is make sure you have all the necessary safety gear. This includes eye protection, gloves and hearing protection. Once you have all your safety gear on, it’s time to start the trimmer.
To start the trimmer, first make sure that the fuel tank is filled with fresh gasoline mixed with two-stroke oil at a 50:1 ratio. Next, open the choke lever fully and press the primer bulb 3-5 times until it feels firm. Finally, pull the starter handle quickly until resistance is felt, then release.
The engine should now start up. Once the engine is running, slowly close the choke lever until it’s in the “run” position. You’re now ready to begin trimming your hedges!
Why Won T My Hedge Trimmer Start?
If your hedge trimmer won’t start, there are a few things you can check to troubleshoot the issue. First, make sure that the trimmer is properly fueled with fresh gasoline and that the spark plug is clean and in good working order. If the problem persists, it’s possible that the carburetor needs to be cleaned or adjusted.
You can try cleaning the carburetor yourself, but if you’re not comfortable doing so, it’s best to take the trimmer to a professional for service.
If you’re looking to purchase a STIHL hedge trimmer, or already have one and need guidance on how to start it, this guide will teach you everything you need to know. After reading this article, you’ll be able to confidently operate your STIHL hedge trimmer so that you can neaten up your outdoor space with ease.