How To Measure Bar Length On Chainsaw?

How To Measure Bar Length On Chainsaw

If you’re a homeowner who uses a chainsaw for occasional cutting jobs, you may not need to know how to measure bar length. But if you’re a professional logger or arborist, it’s essential to know how to correctly measure the bar length on your chainsaw.

Bar length is typically measured in inches, and it’s important to know the right size bar for the job you’re doing.

There are a few different ways to measure bar length on a chainsaw. The most common way is to measure from the tip of the bar to the center of the sprocket nose. Another way is to measure from the tip of the bar to the front of the chainsaw body.

To measure the bar length from the tip of the bar to the center of the sprocket nose, first extended the bar fully. Then, using a tape measure, measure from the very end of the bar to the center of the sprocket nose.

To measure from the tip of the bar to the front of the chainsaw body, extend the bar fully and measure from the tip to the front of the chainsaw body. Finally, to measure the bar itself, simply measure the length of the bar itself. Knowing how to correctly measure bar length is important for a few reasons.

Tips for Measuring a Chainsaw Bar and Chain

  • Place the end of the bar against a hard, flat surface
  • Use a ruler or tape measure to measure the length of the bar, from the end to the point where it meets the body of the chainsaw
  • Write down the measurement, or remember it for later reference

How to measure a chainsaw guide bar

How to measure stihl chainsaw bar length?

When it comes to measuring the length of your Stihl chainsaw bar, there are a few things you need to take into consideration. First, you need to determine the pitch of your saw chain. The pitch is the distance between three rivets divided by two.

Once you know the pitch, you can then determine the bar length by measuring from the tip of the nose to the center of the first drive link. It’s important to note that the bar length can vary depending on the model of Stihl chainsaw you have. For example, the MS 290 has a 16″ bar, while the MS 361 has a 20″ bar.

In addition, the bar length can also be affected by the type of chain you’re using. For instance, the 3/8″ pitch chain will result in a shorter bar length than the .404″ pitch chain. To ensure you’re measuring the correct length, it’s best to consult your Stihl chainsaw manual.

This will give you the most accurate measurement for your specific model.

How to measure Husqvarna chainsaw bar length?

When it comes to Husqvarna chainsaws, the bar length is one of the most important specifications. This is because the bar length determines the size of the saw and the type of cutting jobs it can handle. For example, a saw with a longer bar can handle larger cutting jobs, while a saw with a shorter bar is better suited for smaller jobs.

To measure the bar length of a Husqvarna chainsaw, you will need a tape measure. Begin by measuring the length of the bar from the tip of the bar to the center of the sprocket. Next, measure the width of the bar at the widest point.

Finally, measure the thickness of the bar at the thickest point. Keep in mind that the bar length is just one of the many factors that you should consider when purchasing a chainsaw. Other important factors include the power of the saw, the size of the chain, and the type of guide bar.

How to measure chainsaw chain length?

The length of the chain will determine how deep the cuts are that the chainsaw can make, as well as how much power is needed to make those cuts. There are a few different ways to measure chainsaw chain length, and each has its own benefits and drawbacks.

The most common way to measure chainsaw chain length is with a tape measure. This method is relatively simple and straightforward, but it can be difficult to get an accurate measurement if the chain is not perfectly straight. Another way to measure chainsaw chain length is with a ruler.

This method is more accurate than using a tape measure, but it can be difficult to keep the ruler in place while measuring. The best way to measure chainsaw chain length is with a laser measuring device. These devices are designed specifically for measuring chainsaw chain length, and they are very accurate.

Chainsaw bar length chart


There are a few things to keep in mind when determining what length of chainsaw bar is right for you. The first is the size of the tree you plan on cutting. If you are only going to be cutting small trees, then a shorter bar will suffice.

However, if you plan on cutting larger trees, you will need a longer bar to reach the center of the tree trunk. Another thing to consider is the type of wood you will be cutting. Harder woods will require a longer bar to cut through, while softer woods can be cut with a shorter bar.

Finally, you need to take into account your own strength and height. If you are tall, you will be able to reach higher branches with a longer bar. If you are shorter, or not as strong, then a shorter bar will be easier for you to handle.

Keep all of these factors in mind when choosing a chainsaw bar length. A good rule of thumb is to choose a bar that is two feet longer than the height of the tree you plan on cutting. This will give you plenty of reach to cut through the entire trunk.

How do you measure a bar size?

There are a few ways to measure a bar size. The most common way is to use a ruler or tape measure. Place the ruler or tape measure at the end of the bar, and then measure the length of the bar.

Another way to measure a bar is to use a weight scale. Place the bar on the weight scale and then read the weight. Another way to measure a bar is to use a measuring cup.

Place the bar in the measuring cup and then read the measurement.

How long is the chain for a 20-in bar chainsaw?

The chain for a 20 in bar chainsaw is typically about 18 to 20 inches long. This varies somewhat depending on the manufacturer, but it is generally in this range. The chain length is one of the main factors that determines how effective the saw will be at cutting through wood.

A longer chain will usually be able to cut through thicker pieces of wood more easily than a shorter chain.

How do you measure the bar length on a Stihl chainsaw?

It is important to know how to measure the bar length on your Stihl chainsaw, as this will determine the size of the saw chain that you need to purchase. The bar length is measured from the tip of the bar to the center of the sprocket. To measure the bar length, you will need a tape measure and a ruler.

Place the ruler on the ground next to the chainsaw, with the zero mark at the tip of the bar. Measure the distance from the tip of the bar to the center of the sprocket, and record this measurement. This is the bar length.

Now that you know the bar length, you can purchase the correct size saw chain. The bar length will determine the pitch of the chain, which is the distance between the drive links. The most common pitches are 3/8″ and .404″.

Be sure to purchase a saw chain that is compatible with your saw’s bar length.

Conclusion

There are a few ways to measure the bar length on your chainsaw. The most common way is to measure from the tip of the bar to the center of the sprocket. Another way is to measure from the bottom of the bar to the top of the bar.

The most accurate way to measure is with a tape measure, but you can also use a ruler or a piece of string.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top